Posted on

Novel membranes from plant waste filter heavy metals from water

Unfortunately, water pollution is still an issue in many places. Heavy metals are a group of water pollutants that can accumulate in the human body and causing cancer and other diseases. Existing technologies for heavy metal removal, however, are very energy intensive.

Scientists from the Nanyang Technological University in Singapore and the Swiss Federal Institute of Technology Zurich (ETHZ) have created a new membrane out of byproducts from the vegetable oil industry. The membrane removes heavy metals from contaminated water. The team discovered that proteins, which originated from peanut or sunflower oil production bind heavy metal ions very effectively. In their tests, they showed that this adsorption process can purify contaminated water so much that it fulfills drinking water quality standards.

The researchers see their membranes as an inexpensive, simple, sustainable and scalable solution for heavy metal removal from water. Their results were published in the Chemical Engineering Journal.

The new protein based membranes were generated by an environmentally friendly process and needed little energy for their use. This makes them a promising water purification solution for industrialized nations as well as less developed countries.

The production of commercial vegetable oils generates protein rich waste products. These remnants remain from the raw plant after the oil extraction. For their membranes, the research team used sunflower and peanut oils. After the proteins had been extracted, they were transformed into nano-amyloid fibrils. These are rope-like structures built from tightly intertwined proteins. The protein fibrils strongly attract heavy metals and act like a molecular sieve. In the published experiments, the membranes removed up to 99.89 percent of heavy metals.

Among the three metals tested, lead and platinum were filtered most effectively, followed by chrome. Since platinum is often used as a catalyst in fuel cells or electrolyzers, the new membrane would be an elegant and cheap method to recover this metal.

The researchers combined the extracted amyloid fibrils with activated carbon. Due to the high surface volume ratio of the amyloid fibrils, they are particularly suitable for adsorption large amounts of heavy metals. The filter can be used for all types of heavy metals. In addition, organic pollutants such as perfluoralkyl and polyfluoralkyl compounds are filtered as well. These chemicals are used for a variety of consumer and industrial products, as well as in nafion membranes of fuel cells.

The concentration of heavy metals in contaminated water determines how much volume the membrane can filter. A hybrid membrane made of sunflower amyloids requires only 16 kg of protein to filter a swimming pool contaminated with 400 parts lead per billion. One kilogram of sunflower extract yields about 160 g of protein. The protein-rich sunflower and peanut oils are inexpensive raw materials. Since this is the first time that amyloid fibrils were obtained from sunflower and peanut proteins, the process must still be scaled and industrialized.

However, due to its simplicity and minimal use of chemical reagents, the process seems easy to scale. This makes it possible to recycle the waste product for further applications and to fully exploit such industrial food waste. The filtered metals can also be extracted and further recycled. After filtration, the membrane with the captured metals can simply be burned and leaving behind only the metals.

While toxic metals such as lead or mercury need safe disposal, other metals such as platinum can be re-used in the production of electronics and other high value devices, such as fuel cells. The recovery of the precious platinum, which costs 30,000 euros per kg, only requires 32 kg of protein, while the recovery of gold, which corresponds to almost 55,000 euros per kg, only requires 16 kg of protein. In view of the costs of less than 1 euro per kg of protein, the advantages are enormous.

The co-author of the article, Raffaele Mezzenga, had already discovered in 2016 that whey proteins from cow milk had similar properties. Back then, the researchers noticed that proteins from plant oil seeds could also have similar properties.

Another great advantage is that, unlike other methods such as reverse osmosis, this filtration does not require electricity. Gravity is completely sufficient for the entire filtration process. The method is also suitable for water purification in poorly developed areas.

Photo: Pixabay

Posted on

Self-cleaning membranes for biofouling control and prevention in water treatment

Membrane-based water treatment is critical for obtaining potable water, for example through wastewater treatment and seawater desalination. However, membrane fouling remains a common undesirable phenomenon affecting all membrane-based separation processes. Various efforts have been made to either directly control biofouling or to prevent it.

Ceramic membranes have better thermal and chemical stability along with higher fouling resistance and longer lifetimes when compared to polymeric membranes. These properties render ceramic membranes superior to polymers.

During the filtration process, the amount of water that can pass through a membrane is known as membrane flux. Due to membrane fouling, this flux is reduced and the affected membrane needs to be refurbished. Different membrane cleaning strategies have been researched including self-cleaning conductive polymeric membrane and electrically-assisted filtration but neither of them has shown a satisfactory flux recovery behavior.

Previous researches have suggested the use of ‘nano zeolite’ and carbon nanostructures for water treatment and desalination applications.

  • Zeolites are crystalline aluminosilicates possessing a well-defined inorganic structure, whose microporous 3-D channels and pores act as filters.
  • Carbon nanostructures consist of highly entangled carbon nanotubes which are made through a standardized chemical vapor deposition method.

To investigate the use of ceramic membranes made from nano zeolite and carbon nanostructures, a group of researchers at the New York University Abu Dhabi, United Arab Emirates, developed a new electro-ceramic membrane and evaluated its antifouling performance. Their research findings were published in the Chemical Engineering Journal.

Research Approach:

Zeolite / CNS membrane preparation:

Nano zeolite-Y (nano-Y) membranes were prepared by dispersing the desired amounts of nano-Y, carbon nanostructures, and polyvinylidene fluoride (PVDF) binder in a water-alcohol solution.

The suspension was vacuum filtered through a microfiltration membrane filter and the membrane was peeled off from it before drying it at room temperature.

Three different ratios of zeolite and carbon nanostructures were prepared initially, with 60, 70, and 80 wt% zeolite. The carbon nanostructures and the binder were prepared at a ratio of 1:1.

Membrane characterization:

The electrical conductivity and mechanical properties of the dried membranes were investigated.

The surface morphology of the zeolite carbon nanostructure membrane was studied through scanning electron microscopy and transmission electron microscopy.

Other tests including the membrane contact angle test were also performed on the different labeled membranes.

Membrane cleaning setup and antibacterial assessment:

Two foulants, yeast (200 mg / L) and sodium alginate (30 mg / L) were used as biofoulants.

A custom-made cell was designed and a fresh membrane was used for each electrochemical measurement performed using linear sweep voltammetry.

Antibacterial properties of the nano-Y carbon nanostructure membranes were determined by the disk diffusion method. Different bacteria were cultured overnight at 37°C in a shaking incubator at 100 rpm.

Results:

Membrane cross-sections showed a uniform distribution of nano-zeolite particles with the carbon nanostructure. Decreasing tensile strength was seen interpreted as successful nano zeolite incorporation. These values changed from 3.3 MPa to 2.1, 1.1 or 0.3 MPa, respectively for 60, 70 and 80 weight% nano-Y. In addition, a decrease in water contact angle from 84.7±2° to 18±4° was demonstrated within 4 min.

The composite membrane demonstrated enhanced electrocatalytic activity for hydrogen evolution in two foulants; yeast and sodium alginate.
These MF electro-ceramic self-cleaning, anti-bacterial membranes seem promising for various separation processes such as in wastewater treatment, dye separation and oil / water separation where fouling and bacterial growth are a major concern.

(Photo: WET GmbH, Attribution, via Wikimedia Commons)

Reference: https://doi.org/10.1016/j.cej.2020.128395 Electro-ceramic self-cleaning membranes for biofouling control and prevention in water treatment, Chemical Engineering Journal, Volume 415, 2021